Premium model with on screen instructions. Rotary knob for fast data changes.
Up to 6 times watering cycles per day (from 1 minute to 9 hours 59 minutes).
Watering days freely selectable.. With battery level display.

Main component of the micro-drip system. Filters the water and reduces the
initial pressure to about 1.5 bar. Water flow rate 2000ltr/hr

Smaller version of the above. Starter component of the Micro-Drip-System. Filters the water and reduces the initial pressure to an operating pressure of approx. 1.5 bar.Water flow rate up to approx. 1,000 l/h. Supplied ready for connection with accessory and connecting pieces for Connecting Pipe and Supply Pipe.

For fully automatic control of up to 6 watering channels in conjunction with GARDENA Water Computers C 1060. The watering channels are activated automatically one after the other according to the programmed watering data. Ideal for plants with different water consumption or if the water volume is not sufficient for operating simultaneously all watering channels. Dial disc to match up channels with set programmes.
With 26.5mm (G ¾") male threads. Complete with 1 x Tap Connector 2801, 4 x Tap Connector 901, 3 end caps and 2 x 19mm (¾") Connector.

The central supply line to the micro-drip system. Resists UV rays. For above or
below ground.

The central supply line to the micro-drip system. Resists UV rays. For above or
below ground.

The supply line for dripheads, spray and mist nozzles, etc.

The supply line for dripheads, spray and mist nozzles, etc.

8343 driphead 2l (10 drip heads, 1 cleaning needle)

8344 driphead 4l (10 drip heads, 1 cleaning needle)

8392 Adjustable driphead 0-20ltr/h (10 drip heads)

1340 driphead 2l (25 drip heads)

1341 driphead 4l (25 drip heads)

1391 Adjustable driphead 0-20ltr/h (10 dripheads)

Spray Nozzles for area covering fine spray irrigation in flower beds, etc. Range 3mtr

1365 360 degree spray nozzle (Contents 5 )

1367 180 degree spray nozzle (Contents 5 ) for area covering fine spray irrigation in flower beds, etc. Range 3mtr

1368 90 degree spray nozzle (Contents 5 ) for area covering fine spray irrigation in flower beds, etc. Range 3mtr

1371 mist nozzle (Contents 5) for sensitive plants and newly planted beds. Irrigated area apx 1mtr

New, improved universal tool for fitting the endline drip heads, spray nozzles, spray nozzle extension pipe and connector 4.6 mm (3/16”). Sturdy metal tip for accurately piercing the connecting pipe. With holder for the cleaning needles of the drip heads (1340, 1341, 8343, 8344).

for flow rate and range adjustment of spray & mist nozzles. (Contents 5 )

for branching off and extending the 13mm connection pipe. (Contents 2)

for branching off and extending the 4.6mm connection pipe. (Contents 10)

for extending 13mm to 4.6mm connecting pipe and for reducing to the 4.6mm pipe. (Contents 5).

for extending 13mm pipe. (Contents 3 )

Spur 4.6mm from 13mm pipe (Contents 10)

for sealing off holes when changes are made by enlargement or layout change. 4.6mm. (Contents 10 )

for sealing off holes in 13mm pipe. (Contents 5)

for shutting off individual 13mm pipelines with in line drip or sprayheads.

for guiding and fixing the 4.6mm pipe into the ground. (Contents 10 )

for guiding and fixing the 13mm pipe into the ground. (Contents 3)

for securing the 13mm pipe to a fixed surface and nozzles in pipeline. (Contents 2) LIMITED STOCK

for securing the 4.6mm pipe to a fixed surface and nozzles in pipeline. (Contents 5) LIMITED STOCK

for changing direction of 13mm pipe. (contents 2 )

for changing direction of 4.6mm pipe. (contents 10)